Accessory Pack Vol. 1 for Poseable 6 Inch Action Figure: 18 Props, Shield and Backpack, No Supports

18 hand-held props, a round shield with a forearm cuff, and a backpack for the poseable 6 inch figure. Every handle is the same 3.0 mm rod, and nothing needs supports.

Requires the base figure, sold separately: Poseable 6 Inch Action Figure (https://www.saiyanprints.com/products/poseable-action-figure). This pack does not include the figure.

Works on the stock figure straight out of the zip: the pack includes two grip-hole hands and the slotted chest. They swap in for the stock hands and chest on the same joints, and the props and backpack need them.

Parts (24 part files, 26 printed pieces, STL and 3MF for each, plus 4 ready-made plates):

• Long-grip tools: wrench, sledge hammer, shovel, pickaxe, axe, pry bar, flashlight, map scroll, torch
• Stub-grip props: lantern, handheld radio, coiled rope, toolbox, binoculars, canteen, supply crate, clipboard, megaphone
• Round shield x1 and forearm shield cuff x1 (the shield hangs on the cuff or the backpack)
• Backpack x1 (dovetail slider)
• Fit coupon x1, comb and hole block (print first)
• Grip-hole hand x2 and slotted chest x1 (swap in for the stock hands and chest)

Fit and posing:

• Print the fit coupon first. It checks the 3.0 mm handle in the grip hole on your printer before you print the rest.
• Swap in the grip-hole hands and the slotted chest: pop off the stock hands, then the head and upper arms, lift the stock chest off the waist ball, fit the slotted chest and refit everything. Same neck, shoulder, waist and wrist joints.
• The props fit the included grip-hole hands (or the Hands and Joints Upgrade fists), not the stock or open hands. The backpack slides into the slotted chest's back slots.
• Have the Holiday Armor Kit too? It includes the same chest and hands, so print that plate once. Own an armor kit? You already have grip-hole hands and can skip printing them, but you still need the slotted chest.
• The shield cuff clips onto the forearm and never sets a joint limit. Backpack and shield stay clear of the neck, waist, shoulders and elbows over their full range.
• With the arm hanging straight, long tools touch the thigh. Slide the tool about 4 mm in the grip or angle the forearm forward.
• Thinnest flat pieces: scroll sheet 1.35 mm, clipboard 1.65 mm, shovel blade 1.7 mm, shield disc 2.0 mm.
• Tools are blunt toy props with rounded edges.
• Includes GUIDE.pdf / GUIDE.md (settings, print order, coupon, assembly) and a spec sheet.

CAD-checked: grip fit, mounts and pose ranges were checked in CAD against the figure's own meshes. Grams and times are slicer estimates.

Warning: small parts, choking hazard. Not for children under 3. Adult supervision recommended.

Private use only unless you buy the Commercial Use license.